Pairing your Indy Evo earbuds together is a straightforward process that enables you to enjoy a seamless audio experience.
Whether you’re gearing up for an intense workout session, commuting, or simply relaxing at home, properly connecting your earbuds is essential for optimal performance.
In the following sections, we’ll guide you through the pairing process, ensuring you can quickly and effortlessly enjoy your favorite music, podcasts, or calls.
Look no further! We have gathered step-by-step instructions on quickly and easily pairing How To Pair Indy Evo Earbuds Together so you can start experiencing their full capabilities.
Keep reading for our helpful tips and tricks on connecting your high-tech earbuds!
Preparation
Checking the earbuds’ battery level
Ensure your Evo earbuds have enough battery to complete the pairing process.
Turning on the earbuds
To activate your earbuds, it is necessary to use the power button. You must then maintain pressure on said button for two seconds.
This action will result in the successful initiation of your earbuds. Ensuring this process is executed accurately is imperative to prevent any inconvenience or frustration…
Placing the earbuds in pairing mode
Upon powering up your earbuds, you must note the subsequent steps to commence the pairing process effectively.
The first step entails the activation of the power button, followed by the sustained pressing of the button for a total duration of four seconds.
This action will begin the pairing mode, ensuring seamless connectivity with the intended device.
It is essential to note that failure to adhere to these prescribed steps may result in a lack of successful pairing, thus causing undue frustration and inconvenience.
You will know they are in pairing mode when the LED flashes white.
Checking for software updates on the earbuds
Before pairing your Indy Evo earbuds, install the latest software version.
This can be done by downloading the Skullcandy app and checking for updates..
How to pair Indy Evo Earbuds together: Step-by-Step Guide
Initial Setup
Before you start, make sure that your earbuds are fully charged. If they’re new, charge them using the provided charging case for at least 1 hour before proceeding. Once they’re charged, remove your Indy Evo earbuds from their case to power them on.
Entering Pairing Mode
With your earbuds out of the case, they should automatically enter pairing mode. If they do not, you can manually trigger pairing mode by touching and holding the touch sensors on both earbuds for four seconds. When ready to pair, the LED indicators will flash red and blue.
Connect to Your Device
On your device, navigate to the Bluetooth settings and ensure Bluetooth is turned on. Look for “Indy Evo” in the list of available devices and select it. If prompted for a pairing code, enter `0000`. Your earbuds should now be paired, and you will hear a confirmation tone indicating a successful connection.
Confirming the Connection
After pairing, play some music to confirm that both earbuds are working correctly. If you only hear sound from one earbud, refer to the troubleshooting section for assistance.
Troubleshooting Common Issues
Earbuds not showing up in the list of available devices
If your earbuds are not appearing in the list of available devices, confirm that both are switched on and in pairing mode.
By prioritizing these basic steps, users can verify that their earbuds are ready to connect and reduce the likelihood of any issues related to visibility or connectivity.
Earbuds not connecting
Confirm that both earbuds have been successfully paired with the same device. If the earbuds were previously connected to separate devices, try removing these connections and restarting the pairing process anew.
By prioritizing these steps, users can ensure that their earbuds are connected to the same device and minimize any issues related to pairing or connectivity.
Earbuds not charging
If your earbuds fail to charge, verify that they are correctly placed within the charging case and that both pins on the back of the earbud align with the terminals.
By double-checking these details, users can ensure that their earbuds are receiving an adequate charge and reduce the likelihood of any issues associated with charging.
Unable to connect/pair the earbuds
If you have difficulty connecting or pairing your earbuds, ensure your mobile device and earbuds are in Bluetooth discoverable mode.
You may also want to try deleting the connection from both devices and starting fresh.
Low audio quality
If you encounter low audio quality on your Indy Evo earbuds, ensure the Bluetooth connection is robust and check for any available software updates.
By prioritizing these two considerations, users can enhance their audio experience and reduce the likelihood of issues with their earbuds.
Advanced Troubleshooting
Resetting the earbuds
If pairing issues persist, resetting the earbuds may be a helpful solution.
To accomplish this, hold the power button for fifteen seconds until you hear a voice prompt declaring “Resetting.” This will eliminate all connection information from the device, providing a blank slate to initiate the pairing process.
By following these guidelines, users can effectively reset their earbuds and increase their chances of a successful pairing.
Resetting the device’s Bluetooth settings
If connectivity issues persist between your devices, resetting the Bluetooth settings on your mobile device may be beneficial.
Doing so will erase existing configurations, providing a clean slate for the setup process. This can be accomplished by accessing your mobile device’s Bluetooth settings and selecting the option to reset them.
To reset your mobile device’s Bluetooth settings, navigate to the Settings menu and select the “Reset Network Settings” option.
After performing this action, switch off both devices before powering them back on again. After this, attempt to connect the devices again, utilizing the guidelines mentioned. By implementing these steps, users can increase their chances of achieving successful connectivity between their devices.
Unpairing and re-pairing the earbuds
If difficulties persist in establishing a connection between your earbuds and device, attempting the unpairing and re-pairing process may be advantageous.
To initiate this process, open the Skullcandy application and choose the “Pair Both” option from the menu. This action will eliminate any pre-existing connections between the earbuds and the device, enabling you to commence afresh with the pairing process.
Following this, pair your earbuds together and achieve a seamless wireless connection.
How to pair Indy EVO earbuds to iPhones and macOS
For individuals seeking to establish a wireless connection between their Indy Evo earbuds and their iOS or macOS device, an additional step is necessary to accomplish this task.
For iOS users, the initial step entails opening the Settings menu and selecting the “Bluetooth” option. Subsequently, peruse the list of available devices and select “Indy Evo.”
In contrast, macOS users must first access the System Preferences menu and select “Bluetooth.” Then, browse the list of available devices and select “Indy Evo.”
By adhering to these guidelines, users can pair their Indy Evo earbuds with their preferred devices.
After successfully connecting your preferred device to the Indy Evo earbuds, follow the steps mentioned to pair them together and create a seamless wireless connection.
With this accomplished, your Indy Evo earbuds are fully functional and prepared for use. Revel in the freedom of hands-free music, phone calls, and additional features with your new, improved wireless headphones.
Conclusion
Establishing a successful wireless connection between your Indy Evo earbuds can be accomplished quickly and concisely by adhering to a few straightforward sequential operations.
As a preliminary requirement, ensuring that both earbuds are activated, set to pairing mode, and further connected to the identical device is essential.
Subsequently, implement the above guidelines to create a harmonious union between your earbuds.
However, should you face any complications throughout the procedure, attempting a reset or unpairing of the earbuds, followed by initiating a fresh start, is recommended to circumvent any further issues.
We hope this guide has helped set you up with your new wireless headphones!
FAQs
To pair your Indy Evo earbuds together, ensure they are fully charged. Then, press and hold the button on both earbuds for 6 seconds until they enter pairing mode.
They will automatically pair, and the earbuds’ LED lights will turn solid once paired.
If your Indy Evo earbuds are not pairing together, ensure they are fully charged and within close range.
If they still don’t pair, try resetting them by placing them in the charging case and holding the button on the back for 10 seconds. Then, remove them from the case and try pairing them again.
You can use just one Indy Evo earbud if you prefer, but both earbuds must be paired to take advantage of all the features, such as stereo sound and touch controls.
